In order to record sound effects for a personal or professional sound effect library one first needs a quality recorder. Personally I've tried all sorts of pricey gear and microphones throughout my sonic adventures only to discover that a solid $150 to $400 handheld digital recorder no larger than an old-school cassette tape box suffices to create sounds good enough for placement in any Film, TV, and media project. In addition, these units run on battery power and the recorded files can be dragged onto your desktop via USB.
Since video has a 48k sample rate then sound effects supplied for video need to be 48k, not the standard 44.1k used for CDS, so any recorder you purchase must be able to record up to 48k quality. If you have a library of 44.1k these samples always have to be up-converted by a video editor and their quality can be compromise. Therefore, do yourself the favor of recording at 48k and you will have a more valuable and usable sound effect collection.
You will need to record two distinct types of sound effects: "ambiences" and "hits." Short single sonic moments such as glass breaking, an explosion, or a light switch click are called hits. Longer recordings of background noises such as those found on a playground, at a train station, or in an airport are called ambiences.
In creating a library it is most valuable to have many of both types as they are both used in sound design. You will find that ambiences are the easiest to obtain, as you merely have to go to a new location such as a supermarket or post office and just stand there and record. Hits need a little more forethought and preparation such as collecting the items you'd like to record or stalking the neighbor's dog for that perfect dog bark.
Recording sounds is simply a matter of pressing record on your digital recorder. Although, it is advised to keep the following points in mind as you record since they will make your work more productive and fruitful.
1. When you record you want to have the loudest signal possible without clipping the microphone, called recording as "hot" as possible. If you notice a small red LED light lighting up during your recording then you need to pull back from the sound because your incoming signal is too loud. The goal is to avoid distortion but capture the strongest sound possible.
2. In order to record sounds with high decibel levels, such as fireworks or loud crowds, buy a 10dB pad which will fit between the digital recorder and your microphone. For $20 purchased online, this pad will lower the incoming signal by 10dB
3. While you want to minimize unwanted sounds and noise in your recordings as much as possible, do not obsess over finding the quietest recording environment because great sound effects can occur unexpectedly such as a beefed up motorcycle cruising by. If you are too uptight about getting that perfect recording environment you will slow yourself down in your efforts to gain content and just remember that you can always filter much background noise from your recordings during the editing process.
4. Wind hitting the head of your microphone will ruin your recordings so keep your recorder out of the wind by using trees, walls, or your body as a physical barrier. If you cut frequencies below 200-500 khz during editing you can get rid of some wind sound but usually your recordings will be ruined by wind.
5. Make sure that your recordings do not contain any live or amplified music from a third party. Your recordings will be useless if they include music from such sources. This music is copyrighted and without permission of the copyright owner it is illegal to use or license such recordings.
It is the hope of this author that the simple advice in this article will aid new sound effect artists in their efforts to create a worthy sound effect library. New articles on editing distinct sound effects from these recordings, categorizing these new sound effects, and licensing them are forthcoming.
Since video has a 48k sample rate then sound effects supplied for video need to be 48k, not the standard 44.1k used for CDS, so any recorder you purchase must be able to record up to 48k quality. If you have a library of 44.1k these samples always have to be up-converted by a video editor and their quality can be compromise. Therefore, do yourself the favor of recording at 48k and you will have a more valuable and usable sound effect collection.
You will need to record two distinct types of sound effects: "ambiences" and "hits." Short single sonic moments such as glass breaking, an explosion, or a light switch click are called hits. Longer recordings of background noises such as those found on a playground, at a train station, or in an airport are called ambiences.
In creating a library it is most valuable to have many of both types as they are both used in sound design. You will find that ambiences are the easiest to obtain, as you merely have to go to a new location such as a supermarket or post office and just stand there and record. Hits need a little more forethought and preparation such as collecting the items you'd like to record or stalking the neighbor's dog for that perfect dog bark.
Recording sounds is simply a matter of pressing record on your digital recorder. Although, it is advised to keep the following points in mind as you record since they will make your work more productive and fruitful.
1. When you record you want to have the loudest signal possible without clipping the microphone, called recording as "hot" as possible. If you notice a small red LED light lighting up during your recording then you need to pull back from the sound because your incoming signal is too loud. The goal is to avoid distortion but capture the strongest sound possible.
2. In order to record sounds with high decibel levels, such as fireworks or loud crowds, buy a 10dB pad which will fit between the digital recorder and your microphone. For $20 purchased online, this pad will lower the incoming signal by 10dB
3. While you want to minimize unwanted sounds and noise in your recordings as much as possible, do not obsess over finding the quietest recording environment because great sound effects can occur unexpectedly such as a beefed up motorcycle cruising by. If you are too uptight about getting that perfect recording environment you will slow yourself down in your efforts to gain content and just remember that you can always filter much background noise from your recordings during the editing process.
4. Wind hitting the head of your microphone will ruin your recordings so keep your recorder out of the wind by using trees, walls, or your body as a physical barrier. If you cut frequencies below 200-500 khz during editing you can get rid of some wind sound but usually your recordings will be ruined by wind.
5. Make sure that your recordings do not contain any live or amplified music from a third party. Your recordings will be useless if they include music from such sources. This music is copyrighted and without permission of the copyright owner it is illegal to use or license such recordings.
It is the hope of this author that the simple advice in this article will aid new sound effect artists in their efforts to create a worthy sound effect library. New articles on editing distinct sound effects from these recordings, categorizing these new sound effects, and licensing them are forthcoming.
About the Author:
SFXsource's sound effect collection that contains a huge variety of sound effects types can be visited, auditioned, and downloaded at Download Sound Effects, and Free Sound Effects and Loops
